CAROUSEL

38' Sabre 1991

$108,900

INTERESTED IN THIS YACHT?

To Learn More Contact

Tim Devaney

561-346-5009

SEND TIM A MESSAGE

Full Name *
Email *
Phone Number *
Comments

SPECIFICATIONS

SHARE ON

38' Sabre 1991 Carousel

BROKER DESCRIPTION

This boat has been well maintained by a top yard in Marion Mass. The owner understands what it takes to keep a great sail boat in top condition____________ A Review by Bob Perry, boats.com 2000

Maintenance records available to qualified buyers

The hull form is contemporary and owes some of its general styling to the IOR tradition. The BWL is moderate, the bilges are quite slack and the midsection is tangent at centerline.  The forefoot is knuckled and the sections forward are U-shaped and relatively flat on centerline.  

SPECIFICATIONS

Builder:

Sabre

Model:

38

Cruise Speed:

0 KTS

Max Speed:

0 KTS

Range NMI:

0

Beam:

12' 4"

Engine Details:

Westerbeke Westerbeke

Engine 1:

37.00 HP

Engine 2:

37.00 HP

Engine Fuel:

Inboard Diesel

Fuel Capacity:

45 GAL

Water Capacity:

0 GAL

DETAILS

The Sabre 38 achieves high performance levels through a unique combination of power and handling characteristics. Whether bluewater sailing or cruising, the Sabre 38 gives the control needed while providing comfort and convenience. She has a high aspect rig with double airfoil spreaders and rod rigging. The boom is equipped with an internal clew outhaul, topping lift and two sets of jiffy reefing. The jib halyard is led to a mid-cabintop Lewmar winch. Main halyard and reefing lines are led aft to Lewmar winches on the cabintop within easy reach of the cockpit. Sabre offers as an option a furling system that combines a roller furling headstay  Her ergonomically designed cockpit measures 8 feet 3 inches long and is fitted with top quality hardware. With a separate cabin fore and aft and a spacious main salon, the Sabre 38 can easily accommodate three couples with privacy. Elegantly finished in varnished teak or cherry, she makes entertaining at the dock or at sea a pleasure. Below, the Sabre 38 has 6-feet 4-inches of headroom, two private cabins, seven berths, an expansive galley, head and navigation station. The aft cabin is another delightful retreat, with a comfortable double berth, a wide settee and hanging locker, and plenty of shelf space. The forward cabin has a wide V-berth, hanging closet and an elegant vanity with sink and settee. The main salon features a large dining area with contoured seating and a handsome teak or cherry table. The table folds away and the port settee converts to a double berth. The starboard settee serves as another berth. The Sabre 38's hull is designed to be easily driven while carrying the weight of a moderate displacement yacht. It's a powerful hull shape that yields speed, stability and sail-carrying ability. The rudder, a semi-elliptical foil section, adds to the yacht's performance abilities. Her skeg gives the directional stability of a full-keel boat with much less drag. With over 1,500 meticulously hand-crafted, varnished wood components, the Sabre 38 is built to custom boat builder's standards. In keeping with the Sabre heritage of quality, we select the finest materials for every yacht we build. You'll find names such as Edson, Hall Spars, Harken, Lewmar and Westerbeke to name a few - a few more reasons why Sabre has come to stand for superior quality and craftsmanship for over two decades. The hull and deck are made of hand-laminated fiberglass mat and knitted roving with balsa core as a stiffener. Sabre increases hull durability by incorporating vinylester resin and ISO NPG gelcoat into the DuraLam protection system. 


IJPE : 689.75 sq ft
I : 49.75 ft
J : 14.50 ft
P : 43.50 ft
E : 15.08 ft
Working Sail Area : 689.00 sq ft

 

Sails:

 Sperry Main, Jib and spin

Keel
Keel Type: Wing
Ballast: 7000 lb
Displacement: 17300 sq ft
Max Draft: 4.92 ft

 

Sabre 38 Specifications - Standard Equipment Hull Construction - Single unit, balsa cored, hand-laminated fiberglass of alternate layers of mat knitted biaxial roving. - Isophthalic gelcoat above waterline. - Below waterline, Sabre technology is used, consisting of chopped strand glass and vinylester resin as a back-up for ISO NPG gelcoat. - Internal deck-to-hull joint with molded-in sealant groove. - Molded-in double boot and single cove stripes. - Bulkheads, berth faces, shelves and floor stringers laminated to hull providing integral, structural strength. -  Deck Construction - Single unit, hand-laminated fiberglass with balsa core for stiffness and marine mahogany plywood in lieu of balsa in high stress areas. - The deck is bonded to the hull using stainless steel thru-bolts every 6" with aircraft style locknuts . - Butyl tape and caulking fills the molded sealant groove at the deck to hull joint. Steering System - Edson wheel steering with 40" Destroyer wheel, wheel guard, and brake. - Ritchie SP-5 compass mounted in stainless steel binnacle. - Emergency tiller stored in cockpit locker. - Balanced rudder is molded fiberglass bonded to a 3" IPS schedule 80 rudder stock that passes through a removable fiberglass bearing and bronze stuffing box securely laminated to the hull. Stem Head - Custom cast alloy stem head and anchor roller. Auxiliary Power - Westerbeke 38B - 4 cylinder fresh water cooled diesel with 2.47:1 reduction gear. - 12-volt 50 amp alternator. - 45 gallon custom aluminum fuel tank, deck filled, shutoff valve, vented and grounded. - Racor fuel filter - water separator. - Raw water intake strainer with wrench. - Four point engine mount system optimized to reduce vibration and noise. - Engine compartment exhaust blower. - Aqua-Drive constant velocity universal joint and thrust bearing connecting the shaft to the engine to reduce engine vibration. - Engine compartment light. - Complete engine access provided by sound and heat insulated removable panels. - Tachometer, hour meter, volt, oil, and temperature are recessed in cockpit face. - Fuel gauge mounted at the nav station. - 1" Aquamet prop shaft passes through a glassed-in PYI shaft seal with bronze strut and 16 x 12, R.H., - Remote oil sump drain. Keel - A modern NACA section fin keel cast in lead with antimony added for strength. - Thru-bolted to a reinforced hull keel sump with stainless steel bolts. Electrical System -  Master AC-DC Bass 6000 marine circuit breaker panels (black) located at the chart table, include AC-DC volt and ammeters, and polarity indicator. Space is provided for additional breakers and electronic gear. - Teak panels access cockpit mounted instrumentation. - All wiring is color coded and meets USCG standards. - Custom cast mid-rail chock fitted into each toerail. - Five part main sheet with Schaefer SS blocks led to Harken recirculating ball bearing cabin top traveler, and to a Lewmar #30 CST two-speed winch. - Custom cast mast collar with provision for halyard and turning block attachments. - (2) 9" 4-bolt cleats forward, (2) mid deck and (2) aft. - Self-draining foredeck anchor locker with drain and padeye for anchor rode. - Pulpit, stern rail and stanchions are custom fabricated of stainless steel and thru-bolted with aluminum backing plates. - Double lifelines of vinyl coated stainless steel cable with port and starboard boarding gates with braced stanchions. - All lifeline terminals and turnbuckles are swaged stainless steel. - Solid teak handrails and toerails. - Stainless companionway hand rail. - Main Halyard led aft. Winches - All winches are Lewmar "Ocean Series." - Main sheet - genoa halyard - led to Lewmar #30 CST two-speed. - Main halyard - Lewmar #30 CST two-speed. - Jiffy reefing - two lines led through a double stopper to a Lewmar #30 CST two-speed winch, mounted on aft cabin top. - Primaries - two Lewmar #54 CST self-tailing winches. - Cockpit - Two deep storage lockers and one storage bin. - Dividers in shallow cockpit locker for small gear. - Molded-in winch handle pockets. - Coamings angled for comfort. - - Two cockpit scuppers to bronze seavalves. - Stove fuel storage locker. - Transom boarding ladder with teak treads. Boom - Aluminum, white Awlgrip finish. - Internal clew outhaul. - External topping lift. - Two sets of internal jiffy reefing. - Lugs for boom vang. Mast - One piece aluminum, keel stepped, Hall Spar mast with double airfoil spreader, masthead rig with white Awlgrip finish. - Masthead with three halyard sheaves and double spinnaker crane. - Internal main and genoa halyards. - Prewired with radio cable. - Standing Rigging - Headstay: wire size 5-16", turnbuckle size 5-8", optional rod Spare halyard exits. size 12. - Chainplates - Stainless steel, thru-bolted to chainplate bulkheads bonded to the hull. - Grounded to the keel. - Mounted well inboard for optimum sheeting angles.  Forward cabin has two 6' 6" V-berths. - Main cabin has two 6' 6" settee berths, port berth converts to a double. - Aft cabin with double berth. - Aft head with shower. - Forward cabin equipped with vanity sink, mirror, storage lockers, and upholstered seat. - All berths provided with 4" foam cushions (main cabin berths have 4 1-2") covered with a durable fabric, zippered for ease of removal. - Raritan PHII head. - Light in hanging locker. Ventilation & Light - 6 Lewmar polished Ocean Series hatches with interior trim, and provisions for screens. - 4 chrome dorade vents. - 4 main cabin fixed port lights of Marguard Lexan. - 4 opening ports in main salon, 4 in aft cabin, 2 in forward cabin, and 1 in aft head. - Acrylic sliding companionway hatch with fiberglass spray hood and solid teak hatch boards. - Screened hatch boards. - Custom stainless ports in main and forward cabins. Sabre Features - Fully equipped tool drawer. - Activated carbon water filter. - 3 type ABC fire extinguishers. - Louvered teak in main cabin doors. - Cockpit locker light. - Bronze recessed thru-hulls with bronze seavalves. - Hoses greater than 1" in diameter are double clamped. - Inlaid cypress wood accents in interior teak trim. - Cypress hull ceilings. - Propane 4 burner stove with oven and gas sniffer. - Hot and cold pressure water. - 

35# CQR anchor

30 ft 5/16 chain

150 ft nylon rode

Raymarine ST 60 wind, speed and depth instruments

ICOM 422 VHF radio with a command mike at the helm

Cobra MRH325 handheld VHF

Furuno 1715 radar

Garmin 2010C GPS/plotter

Raymarine Evolution ACU-200 autopilot with Type-1 linear drive and rudder sensor

Raymarine ST70 autopilot controller

Ritchie 5” binnacle compass

Balmar 75 amp alternator with a Balmar MC612 multistage voltage regulator

Guest 30 amp battery charger

3 Group 31 AGM batteries, 2 house and 1 dedicated engine start (315 Ah total)

Shore power cord

Westerbeke 38B 33 hp diesel IB Maxprop, 3-bladed

Maxprop, 3-bladed

Aquadrive shaft coupling

Automatic and manual bilge pumps

Bilge high water alarm

Webasto diesel forced hot air heater

Raritan 6 gal hot water heater

Pressure water system with foot pumps at each sink

Macerator pump for overboard discharge

Regal Safgas 4 burner CNG stove with oven

Ice chest

Andersen 46 electric mainsail halyard winch

Andersen 40 mainsheet winch

Lewmar 52 genoa sheet winches

Lewmar 30 (2) cabin top winches for jib halyard and vang

Harken rigid boom vang

Sailtec hydraulic backstay adjuster

Harken headsail roller furler

Main, jib and cruising spinnaker with sock and ATN tacker

Whisker pole

Forespar Motor Mate (up to 100 lb outboard motor)

Fenders and docking lines

Cockpit cushions

Westmarine compact RIB 10’2”

Mercury 3.5 hp 4-stroke outboard

 

Fire extinguishers (4) type ABC

Inflatable PFDs (6)

Smoke alarm

CO alarm (battery powered)

Life sling

All required USCG safety equipment, including navigation lights and sound and light signals

This listing is presented to you courtesy of a member of the International Yacht Brokers Association and may be centrally listed with another broker. It is offered as a convenience by this broker/dealer to its clients and is not intended to convey direct representation of a particular vessel.

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Other Yachts for Sale

LOON

42' Morris 2006

Falmouth, Massachusetts

BAYLINER

28' Bayliner 2006

Palmetto, Florida

THE BIG J

35' Allmand 1983

Warwick, Rhode Island